Cart 0

My cart

Call us: (+34) 699 239 392

Tag Archives: Protection

Cargo Shrink Wrap. How to Retract a Merchandise
Industrial packaging, Physical and chemical protection, Transport and logistics

How to Retract a Merchandise

Post by 360 Ecopackaging On 0 Comments

The shrink wrapping of goods is a process used to secure and protect products during transport or prolonged storage.

This type of plastic creates a protective film capable of protecting items against adverse atmospheric conditions (UV rays, rain, wind…).

 

Materials needed for shrink wrapping

Below, we provide you with the necessary materials to shrink wrap effectively:

Cargo Shrink Wrap. How to Retract a Merchandise

Steps to follow to shrink-wrap goods

 

Prepare the load: the first step is to place the products in an organized way, making sure that they are well secured and that they do not move.

Cut the shrink wrap: next, cut the necessary amount of shrink wrap to completely cover the load. It is important that the shrink wrap is long enough to seal the bottom of the pallet.

Place the shrink wrap over the load: once the shrink wrap is cut, unfold it over the load and check that it is completely covered. If it is not well covered, adjust its position.

Seal the plastic at the bottom: with the help of the clamp, seal the plastic to the bottom of the load, so that it is taut and tight, to avoid wrinkles or air pockets.

Apply heat: in this step, repeat the same process as in the previous procedure, but this time it is done on the load. Again, it is important to avoid possible wrinkles or air pockets.

Finish shrink-wrapping: the last step is to check that there are no gaps or goods exposed to the elements. In case of an error, this piece should be covered with more plastic or with specific adhesive tape.

Cargo Shrink Wrap. How to Retract a Merchandise

By following these steps, you can confidently and effectively shrink-wrap your merchandise, ensuring its protection and security during transportation or storage.

Shrink-wrapping offers many benefits, such as safeguarding against dust, moisture, and tampering, while also providing a professional and presentable appearance. Remember to carefully select the appropriate shrink plastic and ensure a tight seal using a Shrink-Wrap Gun. With these techniques, you can retract your merchandise with ease and peace of mind.

Whether you’re a business owner looking to streamline your packaging process or an individual seeking to protect valuable items, mastering the art of shrink-wrapping is a valuable skill. With practice and attention to detail, you can ensure that your merchandise arrives in its intended condition, impressing customers and preserving the quality of your products.

So, embrace the advantages of shrink-wrapping and confidently package your merchandise with the knowledge and skills gained from this guide. Efficiently securing your goods will not only save you time and money but also enhance the overall customer experience.

Bubble Wrap
Industrial packaging, Protection-and-padding

Bubble Wrap

Post by 360 Ecopackaging On 0 Comments

In today’s post we will develop a very employed element in packaging, the alveolar film, more commonly known as bubble wrap.

This type of film can be used in the packaging of fragile and small objects, such as the packaging of parts for industrial use, as well as insulation in sectors such as construction.

This type of film is a transparent and flexible material, composed of polyethylene plastic sheets joined together by mechanical-thermal methods, which allows the formation of air bubbles, its main characteristic, these bubbles provide excellent cushioning and insulating properties.

Bubble Wrap

Types of bubble film

 

2-layer bubble film or Simple:

This type of bubble film is composed of only two sheets of polyethylene, which makes its manufacturing process very simple.

The first film or layer used passes through a perforated cylinder that suctions it by pressure, then it is sealed with the second layer by means of heat, which creates air bubbles.

Bubble Wrap
Bubble Wrap

3-layer bubble film or Closed:

The 3-layer or closed bubble film is made of 3 polyethylene sheets, which makes it more resistant than the simple film.

The creation process has few differences with respect to the simple film, the fundamental difference, as its name suggests, is that a third sheet of polyethylene is added on top, creating a sort of second bubble that cushions impacts, which makes this type of plastic more resistant and improves its properties.

Bubble Wrap

Characteristics of bubble film

 Thickness:

Bubble film can be presented in different thicknesses measured in grams per m2

Thickness – Bubble Type

30g/m2 – Very thin bubble, more economical.

40g/m2 – Commercial bubble

50g/m2 – Standard bubble wrap and highly recommended for all packaging uses.

60g/m2 – Strong bubbles, professional use.

70g/m2 – Very strong and resistant bubble paper.

more than 80 – Extra strong, not very common in packaging.

 

Laminate:

Bubble Wrap
Bubble Wrap

How to use bubble film

One of the most common questions when packaging products with bubble film is the arrangement of the bubbles, that is, whether to put the bubble inside or outside.

We may think that it is indifferent since the order of the factors does not alter the product, but it is not.

Below, we show you two photos with two boxes packed with bubble film, one of them with the bubble facing outwards and the other facing inwards.

  • Bubble Wrap
  • Bubble Wrap

As we can see in the first photo in which the bubble is facing outwards, between bubble and bubble we are only protecting our product with a thin layer of flat polyethylene film, which makes the protection decreases considerably, on the other hand, the bubbles are exposed to all kinds of blows, scratches etc. and could be easily punctured.

If we look at the second photo in which the bubble film is with the bubble facing inwards, we can see that the object is completely protected and the bubbles do not run the risk of being punctured.

 

If we use triple-layer bubble film in our pack6aging, we would not have any of these problems, since by creating a second bubble it makes no difference how the film is placed, because a flat surface will always appear on top, with the bubbles placed underneath, which means that they are protected. The use of this type of film would have a higher cost, since it has a more complex manufacturing process.

 

As a final conclusion and after analyzing the honeycomb film in detail, we can see the number of possibilities offered by a product so commonly used in both industrial and domestic use, so depending on our needs we must analyze what type of film or what characteristics it should have to obtain the best results.

Wrapping up our journey through the fascinating world of bubble wrap, we hope you have discovered its importance and versatility in protecting our precious belongings.

As we reflect on the need to reduce environmental impact, let us also remember the value of reusing and recycling this material to minimize its ecological footprint. Let’s continue working together towards a sustainable future!

If you have any further questions or comments, feel free to share them. Contact us.

Easter 360 Eco Packaging
Holidays

Happy Easter Holidays!

Post by 360 Ecopackaging On 0 Comments

Happy Easter holiday!
We will return next week with more energy, more information about our packaging products, photos, content and the most outstanding news about the sectors of interest of the industry.

 

Joyeuses vacances de Pâques!
Nous reviendrons la semaine prochaine avec plus d’énergie, plus d’informations sur nos produits d’emballage, photos, contenus et les nouvelles les plus remarquables sur les secteurs d’intérêt de l’industrie.

 

Boas férias de Páscoa!
Voltaremos na próxima semana com mais energia, mais informações sobre nossos produtos de embalagem, fotos, conteúdos e as notícias mais marcantes sobre os setores de interesse da indústria.

 

X
Open chat
Thank you for contacting 360 Eco Packaging.
How can I help you ?